Alpine 24Print Datasheet
|Materials||Mild Steel, Pre Galvanised, Stainless Steel, Aluminium, Brass, Bronze, Copper, Phosphor Bronze|
|Thickness of mesh||10mm|
|Max Panel Size||4000mm x 10m|
Alpine 24 is a simple yet cost effective metal mesh, it is constructed from alternating left and right hand spiral coils. The coils are held in place by interconnecting crimp rods which run through the width of the mesh panel. The edges of the mesh as welded to provide additional strength.
Alpine 24 is perfect for cladding entire facades due to its continuous manufacturing process enabling large panels to be fabricate in one piece. Tensioning is also achieved using flat bars and eye bolts inserted into the top and bottom of the panels. This mesh also lends itself to be used for balustrades, metal curtains, partitions and space dividers.
Due to this product being a flexible mesh it does not lend itself to any secondary finishes. Therefore it is only available in its bare material finish.
Flat Bar & Fork Bolt Fixing
Balustrade Installation Example