Alpine C12 is an adaptation of Alpine 12, the main difference is two spiral coils are used on the width to create the diamond and cross effect. The coils are held in place by interconnecting crimp rods which run through the width of the mesh panel. The edges of the mesh are welded to provide additional strength.
Alpine 12 is perfect for cladding entire facades due to its continuous manufacturing process enabling large panels to be fabricated in one piece. Tensioning is also achieved using flat bars and eye bolts inserted into the top and bottom of the panels. This mesh also lends itself to be used for balustrades, metal curtains, partitions and space dividers.
|Max Panel Sizes||4000mm wide x 10m high|
|Percent Open Area||47%|
AS101 can be used for internal and external applications. It utilises a flat bar inserted into an elongated coil and the top and bottom of the panels. Fork bolts are inserted into pre drilled holes in the flat bar to provide tension when installed.